Powerlink Indoor 1W Wireless 802.11 b/g/n Signal Booster/Amplifier w/5dBi Antenna Fits SMA and TNC Connectors

Powerlink Indoor 1W Wireless 802.11 b/g/n Signal Booster/Amplifier w/5dBi Antenna Fits SMA and TNC Connectors Review

See more picture @ amazon.com

Powerlink Indoor 1W Wireless 802.11 b/g/n Signal Booster/Amplifier w/5dBi Antenna Fits SMA and TNC Connectors Feature

• Boost Signal up to 5000ft.
• Works on routers which either SMA or TNC connectors
• 5dBi Antenna w/SMA Female Connector
• Antenna length: 191 mm

Description: PL-2301A is an indoor solution 1W bi-directional Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 802.11b/g/n devices. The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increases the receive sensitivity of wireless LAN Access Point. Full output power of 1W is achieved with only 5 mW input into the Booster. Character: Cast Aluminum Construction Power and transmit LEDs 15dB transmit gain (adjustable) Lightning Protection High Gain, High Value, High Performance Increase range of low powered radio modems Antenna Specifications: 5dBi Antenna w/SMA Female Connector 145% Performance 150% Distance Antenna length: 191mm Connector: SMA Female Booster Specifications: Operation Range 2400-2500 MHz Operating Mode Bi-directional, half-duplex, Auto-Switching via carrier sensing Transmit Gain 15dB (Adjustable) Output Power 1W/30dBm nominal for 802.11g/54Mbps Frequency Response *+- 1dB over operation range Transmit Input Power Max. 100mW, Min 6mW Receiver Gain 15dB typical Receive Noise Figure 3.5dB typical Connector SMA receptacle (50 ohm) Power 6V DV Max. current <1A, 90-264V for AC adapter Operating Temp. *-20 to + 70C Operating Humidity Up to 95% relative humidity Distance* Up to 1500M (5000ft) depends on environment Dimension (cm) 7.8 cm (L) x 5.6 cm (W) x 2.9 cm (H) Material Die Casting Aluminum Safety Certification FCC/CE/VCCI Package Content: 1W Booster/Amplifier AC adapter (110~240V input) RG316 Cable (30cm) (Connector: RP-SMA-Male to RP-SMA-Female) SMA to TNC Adapter (SMA-Male to TNC-Female) 5dBi Antenna Manual

Wireless Extenders zBoost YX039 Dual-Band Directional Outdoor Signal Antenna

Wireless Extenders zBoost YX039 Dual-Band Directional Outdoor Signal Antenna Review

Wireless Extenders zBoost YX039 Dual-Band Directional Outdoor Signal Antenna Feature

• Gain: 8dBi (824-896MHz) and 13dBi (1850-1990MHz)
• This directional antenna system captures signals in both 800 MHz Cellular &1900 MHz PCS bands for the use with zBoost dual-band amplifier systems
• 1 year manufacturer warranty
• Improves Performance Of Wexyx510
• Provides Larger Area Of Indoor Improved Signal
• Improves Indoor Performance Where Weak Outdoor Signal Exists
• Operates with 850 Mhz Bands & 1900 Mhz Bands

The YX039-PCS-CEL dual-band outdoor signal antenna system allows your Wi-Ex cell phone signal booster to provide a larger area of improved indoor signal strength and improve indoor performance where weak outdoor cell signals exist. The antenna operates with signals in both the 850 MHz Cellular and the 1900 MHz PCS bands. The YX039-PCS-CEL dual-band antenna system consists of two directional panel antennas, one for the Cellular band (850 MHz) and one for the PCS band (1900 MHz). An antenna combiner is included to combine the signals from the two antennas into one coax for connection to the Wi-Ex Base Unit. Two 18-inch coaxial jumpers are included to connect each panel antenna to the Combiner. zBoost will increases signal for voice transmission,increases signal and speed of aircards, EDGE and 3G technology, uses patent-pending technologies to protect the carrier network . It is not compatible with Nextel/iDEN devices. zBoost has a 1 year manufacturer warranty. zBoost provides solutions for the 70% of cell phone owners experiencing problems with their cell phone service, including dropped calls, poor signal reception or dead zones. zBoost improves indoor cell phone signal by capturing and enhancing outside signal, then bringing it indoors.

The use of radio distribution equipment that enhances, extends or amplifies a wireless signal may be prohibited without the consent of the wireless carrier upon whose network such equipment will be used. You should consult with your carrier before purchasing such equipment to use with that carrier’s service.

Universal Generation X Cell Phone Antenna Booster Signal Enhancer

Universal Generation X Cell Phone Antenna Booster Signal Enhancer Review

Universal Generation X Cell Phone Antenna Booster Signal Enhancer Feature

• Reduces dropped calls and fading signals.
• Significantly improves signal strength.
• Enhances sound quality.
• Can be used with any cell phone.

This is a Universal Generation X Cell Phone Antenna Booster Signal Enhancer.

Slate1000 N Wi-Fi Signal Booster with Easy USB Connectivity with Up to 10 Mile Range

Slate1000 N Wi-Fi Signal Booster with Easy USB Connectivity with Up to 10 Mile Range Review

Slate1000 N Wi-Fi Signal Booster with Easy USB Connectivity with Up to 10 Mile Range Feature

• Better Range = Better Access
• Faster Internet Speeds
• Operating distance of up to 1000 meters
• Plug in to Any USB 2.0/1.1 Interface
• Travels Anywhere

An extremely portable solution for accessing a strong Wi-Fi connection on the go. The Mighty Rad's small form factor and 1 watt amplifier makes it applicable for use on a boat or for hotels and airports. Compatible with b, g, & n networks.

New Silvery 1W Wireless Wifi 802.11b/g Signal Booster Amplifier+One Cute Sexy Red Bra Key Chain Charm Strap

New Silvery 1W Wireless Wifi 802.11b/g Signal Booster Amplifier+One Cute Sexy Red Bra Key Chain Charm Strap Review

New Silvery 1W Wireless Wifi 802.11b/g Signal Booster Amplifier+One Cute Sexy Red Bra Key Chain Charm Strap Feature

• Increase the effective range and coverage area of your Wi-Fi network.. Ideal for increase the 2000-2500Mhz frequency devices.
• Ideal for use with 2.4GHz Wireless LANs
• High Gain, High Value, High Performance and low-noise receive gain
• Plug-and-play, Easy installation, no driver needed
• Maximum output power of 1000mW by the Booster!

NOTE:

The item need connect with the Access Point Router together ,then it can work and the Access Point Router are NOT included

Specifications

o Operation Range: 2400-2500 MHz

o Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing

o Frequency Response: ± 1dB over operation range

o Input Power: 6dBm (Min.)-20dBm (Max.)

o Input Power 5 ~ 20 dBm

o Optimal Input Power 9 ~ 13 dBm

o Output Power: 1000mW

o Connector: SMA Receptacle, 50 ohm

o Transmit Gain: 13-17dBm nominal

o Receiver Gain: <12dBm

o Receive Noise Figure: 3.0dBm nominal

o Operating Temperature: 20 to 70 degree

o Operating Humidity: Up to 95% relative humidity o Dimension: 3" (L) x 2.2 "(W) x1.1" (H)

o Material: Cast Aluminum

o Safety Certification: FCC/CE/VCC

Usage:

Step1: Remove the Antenna from the wireless radio (Acess Ponit);

Step2: Use RG316 cable to connect the Booster and AP;

Step3: Connect the Antenna to the other end of Booster;

Step4: Plug in the Power adapter

Package iincluded:

? 1×Booster

? 1×Power plug

? 1×15cm SMA cable

? 1×5 dBi antenna

? 1×Cute Sexy Red Bra Key Chain Charm Strap

10 CELL PHONE ANTENNA SIGNAL BOOSTER BOOSTERS AS SEEN ON TV

10 CELL PHONE ANTENNA SIGNAL BOOSTER BOOSTERS AS SEEN ON TV Review

10 CELL PHONE ANTENNA SIGNAL BOOSTER BOOSTERS AS SEEN ON TV Feature

• Reduces Dropped Calls and Fading Signals
• Improves Signal Strength
• Enhances Sound Quality
• Can Be Used with Any Cell Phone

IT'S LIKE HAVING A FOUR FOOT ANTENNA ON YOUR PHONE. Works on any mobile phone. Reduces Static.

CellularFactory: Universal Generation X Cell Phone Antenna Booster Signal Enhancer for Iphone apple

CellularFactory: Universal Generation X Cell Phone Antenna Booster Signal Enhancer for Iphone apple Review

Universal Generation X Cell Phone Antenna Booster Signal Enhancer for Iphone apple . The Universal Generation X Cell Phone Antenna Booster Signal Enhancer is a passive device designed to capture stray radiation in the body of the cell phone and to re-radiate the signal to improve the phones reception. The signal booster will work most efficiently when installed properly. When using the phone, try to avoid placing your hand over the area where the internal antenna is installed.There are no tools required for installation.FEATURES: Enables to reduce dropped calls and fading signals. To improves signal strength. Enhances sound quality. Can be used with any cell phone, PDA.INSTRUCTIONS:Simply place the antenna under your battery to add the equivalent of a 4' antenna to your phone or PDA.Compatible With Iphone iPhone 4 (GSM,AT&T) iPhone 4S iPhone 3GS iPhone 4 (CDMA) iPhone iPhone 3G

Samsung SCS-2U01 3G Verizon Wireless Network Extender Indoor CDMA/EVDO Cellular - Remanufactured

Samsung SCS-2U01 3G Verizon Wireless Network Extender Indoor CDMA/EVDO Cellular - Remanufactured Review

Samsung SCS-2U01 3G Verizon Wireless Network Extender Indoor CDMA/EVDO Cellular - Remanufactured Feature

• Remanufactured in new Condition
• Boosts low signals
• Support for up to six simultaneous users
• Connects through your broadband router
• Extends Verizon Wireless network

Samsung Remanufactured SCS-2U01 3G Wireless Network Extender for Verizon - Enhance Indoor CDMA/EVDO Cellular Coverage!

Motorola Signal Booster 484095-001-00 Bi-Directional RF Amplifier

Motorola Signal Booster 484095-001-00 Bi-Directional RF Amplifier Review

Motorola Signal Booster 484095-001-00 Bi-Directional RF Amplifier Feature

• Improve signal strength by up to 32 times (15 dB)
• Low noise addition of only 3 dB
• Superb gold patented connector design
• Supports Pay-Per-View and Video on Demand (VOD) Services
• Quick, easy installation

If you're ever annoyed by weak cable TV or cable modem signals--often caused by older cable wiring in your home--then Motorola's in-line broadband drop amplifier makes a great solution. Boost your weak signal up to 32 times with this easy to install device, and leave the frustration behind.

Boost your weak cable or Internet signal up to 32 times with this easy to install device.

Click to view a local-power install diagram.

Click to view a remote-power install diagram.

Boost Your Signal

Make your signal strength up to 32 times more powerful in a snap, to enhance analog and digital picture quality, improves cable modem communication, and reduce lost data. This device also allows you to optimize multiple broadband devices in your home--televisions, cable set-top boxes, cable modems, VCRs, and digital radios--all from one convenient cable.

No Tools Required

This amplifier is a breeze to install, with no tools are required. All connections, including the AC adapter, are easy F-type coaxial ports, so everything screws right in. This also enables local or remote powering.

Solid Construction

The BDA100 features Gallium Arsenide technology for improved distortion and noise performance, and built-in diplex filters for two-way operation.

A weather seal and protective coating make it work for both indoor or outdoor applications, and it boasts -6 kV surge resistance. Each BDA100 is housed within a robust aluminum die-cast housing and utilizes a Motorola P-Series Auto-Seize F-Connector for maximum reliability.

What's in the Box

BDA100 Amplifier, AC Adapter, Two Coaxial Cables, User's Manual

Motorola Signal Booster 484095-001-00 Bi-Directional RF Amplifier

Wilson Electronics 815226 Sleek Cell Phone Signal Car Cradle Booster with Kit For Home Use

Wilson Electronics 815226 Sleek Cell Phone Signal Car Cradle Booster with Kit For Home Use Review

Wilson Electronics 815226 Sleek Cell Phone Signal Car Cradle Booster with Kit For Home Use Feature

• Reduces dropped calls, extends signal range, and increases data rates
• Built in amplifier boosts signals to and from cell site
• Up to 20 TIMES more output power to cell site when in a vehicle
• Receives weak signals the phone alone may not
• Built-in port for battery charging

The Wilson plug-and-play SleekTM helps users reduce dropped calls, increase data rates in weak signal areas and originate calls from those dreaded "dead spots". The SleekTM and its external vehicular antenna increases any phone's output power to the cell site while improving its ability to hear signals it normally cannot, keeping the user more reliably connected. Designed for simple set up, the SleekTM can be easily moved from vehicle to vehicle. Built into the SleekTM cradle is a Wilson tried and tested bi-directional signal amplifier and battery charging port. The cradle is ideal for hands free operation in conjunction with a user's headset or Bluetooth device. Wilson, in business for 42 years, has consistently led the industry in performance standards and holds a number of patents including the industry's best and most reliable method of amplifier cell site interference protection. Wilson's designs consistently outperform the competition in real world performance. All Wilson products are engineered, assembled and 100% tested at the company's headquarters in St. George, Utah. Wilson products fully comply with industry guidelines for cellular devices and are FCC Type Accepted and meet Industry Canada requirements.